Innokin Jem Coils Pack Of 5

Innokin Jem Coils Pack Of 5, Replacement Coils for the Innokin Jem Pod Kit

The Innokin Jem Coils Pack Of 5 is a bundle of five genuine replacement coil heads made for the Innokin Jem pod system. If your Jem has started tasting flat, burnt, or just "off," it's almost always the coil rather than the e-liquid or the pod itself, and this pack gets you five fresh swaps in one go so you're not reordering every few weeks.

Innokin built the Jem as a simple, no-fuss pod kit aimed at people who want a straightforward mouth-to-lung vape without dials, wattage curves, or fiddly settings. The coil is a big part of why the device works the way it does, and buying in a pack of five is the sensible way to run it, you always have a spare on hand rather than being caught out with a dead coil and no backup.

Built For The Innokin Jem Pod System

These coils are designed specifically to slot into Innokin Jem pods and are not intended as a universal fit for other brands or other Innokin devices. Before ordering, check the coil against the pod you're currently using rather than assuming compatibility across different Innokin kits, pod systems are rarely interchangeable between ranges, even within the same manufacturer, because the coil deck, wicking channel, and airflow are all matched to one specific pod shape.

If you're unsure which coil your device takes, the safest way to confirm it is to check the coil that's already fitted or the details that came with your Jem kit. Getting this right matters: a coil that isn't a genuine match for the pod can sit loosely, leak, or simply fail to seal, which wastes e-liquid and gives a poor vape.

Coil Design And Vaping Style

The Jem coil is built around a single, fixed resistance tuned for mouth-to-lung (MTL) vaping, the tight, cigarette-like draw that Innokin's Jem range is designed around, rather than the airy, direct-lung style of sub-ohm tanks. That fixed setup is deliberate. It keeps the device simple: no resistance chart to think about, no wattage to dial in, just fit the coil, fill the pod, and vape.

Because the coil is matched to the pod's airflow and wicking system as a set, don't try to mix components from a different pod range even if they look similar. The coil, the pod housing, and the airflow channel are engineered together, and swapping in an unmatched part is one of the most common causes of leaking, gurgling, or weak flavour on pod systems generally.

Signs It's Time To Replace Your Coil

Coils are consumable by nature, the wicking material and heating element both degrade with use, and no coil lasts forever. Watch out for these signs that a swap is overdue:

• Burnt or harsh taste that wasn't there when the coil was new, even with the same e-liquid.
• A noticeable drop in flavour, where the vape tastes muted, thin, or dull compared with a fresh coil.
• Gurgling or crackling sounds from the pod, which usually points to a flooded or failing wick.
• Leaking around the base of the pod, often a sign the coil's seals or wicking have started to break down.
• Reduced vapour production, where the device seems to be working harder for less output.

How long a coil lasts varies a lot from person to person. Usage habits, e-liquid choice, and how the pod is looked after all play a part, so there's no fixed "replace every X days" rule that applies to everyone. The signs above are a far more reliable guide than any calendar estimate.

How To Fit And Prime Your Innokin Jem Coil

Fitting a new coil is quick, but priming it properly is the step people most often rush, and it's the one that determines whether your first few puffs taste clean or scorched. Here's the process:

• Remove the old coil from the pod, disposing of it responsibly rather than in general household rubbish where possible.
• Fit the new coil into the pod, making sure it's seated fully and securely so there's no gap that could cause leaking.
• Prime the coil before use by adding a few drops of e-liquid directly onto the visible wicking material and letting it sit for several minutes. This lets the wick fully saturate before any power reaches it.
• Fill the pod with your chosen e-liquid, then leave it to stand a little longer, ideally five to ten minutes, so the liquid has time to soak through fully.
• Take a few gentle test puffs without inhaling fully at first, just to check the flavour is clean and there's no dry, burnt taste. If it tastes harsh, give it more standing time before vaping normally.

Skipping the priming step is the single biggest cause of a "burnt hit" on a brand-new coil. The heating element doesn't know it's new, if it fires before the wick is saturated, it will scorch dry cotton, and no amount of extra e-liquid afterwards fully undoes that first burn. It's worth the few minutes of patience.

Getting The Best Flavour And Longest Coil Life

A few habits make a real difference to how long each coil in this pack lasts and how good it tastes along the way:

• Don't let the pod run dry. Vaping on a coil with little or no e-liquid left is one of the fastest ways to burn it out permanently.
• Give new liquid time to soak in whenever you refill, especially if you've let the pod run low before topping up.
• Take steady, moderate puffs rather than long, rapid draws back to back, this gives the wick time to keep up and reduces the risk of a dry hit.
• Store spare coils properly, keeping them in their original packaging, away from heat and direct sunlight, until you're ready to use them.
• Consider your e-liquid's sweetener and additive content, since heavily sweetened liquids tend to cause quicker coil gunking, which can shorten lifespan and dull flavour over time.

Rotating through the coils in this five-pack as needed, rather than pushing a single coil well past its best, is generally the better trade-off, a fresh coil every so often gives more consistent flavour than trying to stretch one coil as far as possible.

UK Compliance And Nicotine Strengths

As with all vaping hardware sold in the UK, this product and the pods it's designed to work with fall under TPD (Tobacco Products Directive) regulations. If you're pairing this coil with nic salt e-liquids, remember that UK nicotine salt strength is legally capped at 20mg/ml (2%). If you choose a 0mg e-liquid, it contains no nicotine at all. Vaping products, including replacement coils, are strictly for adults aged 18 and over.

Frequently Asked Questions

Will these coils fit my Innokin device?

These coils are made for the Innokin Jem pod system specifically. They're not designed as a universal fit across Innokin's wider range, so check that your device is a Jem pod kit before ordering, or compare against the coil currently fitted if you're unsure.

How often should I change the coil in my Jem?

There's no single fixed timeframe, since it depends on how much you vape, your e-liquid choice, and how well the pod is looked after. Instead of watching the calendar, watch for burnt taste, reduced flavour, gurgling, or leaking, those are the real signals it's time for a fresh coil from this pack.

Why does my new coil taste burnt straight away?

This is almost always down to priming. If the coil fires before the wick has had a chance to fully soak up e-liquid, it scorches instantly. Always add a few drops of e-liquid to the coil's wick, fill the pod, and leave it to stand for several minutes before vaping.

Can I use any e-liquid with these coils?

These coils are built for mouth-to-lung vaping, so they generally pair best with e-liquids intended for MTL use, including nic salts up to the UK's legal 20mg/ml limit, or 0mg options if you prefer nicotine-free vaping. Very high-VG liquids designed for sub-ohm tanks may not wick as well through an MTL coil like this one.

Why buy a pack of five instead of a single coil?

Coils are a consumable part, not a one-off purchase, so most Jem users get through several over time regardless. Buying a five-pack means you're not caught without a spare when your current coil starts to go, and it usually works out better value than buying single replacements repeatedly.

My pod is leaking after fitting a new coil, what's wrong?

Check first that the coil is seated fully and securely in the pod, with no gap around the base. Leaking straight after a coil change is often down to the coil not being pushed all the way in, or the pod being overfilled before the new coil has had time to prime properly.