SKE Crystal CL6000 Vape Kit

SKE Crystal CL6000 Vape Kit: the basics

The SKE Crystal CL6000 Vape Kit is a refillable pod kit built around one idea: keep the device, swap the pod, keep vaping. Instead of throwing away a full disposable every time the juice runs low, you're holding onto a reusable body and clicking in a fresh pod when the old one's spent. SKE rates the CL6000 at up to approximately 6,000 puffs per pod, so a single fill-up is built to last through a proper stretch of everyday use rather than a day or two.

This is the "kit" version, meaning the box gets you the device itself, ready to go with an initial pod. From there, SKE also sells the CL6000 pods separately as prefilled pods and as empty refill containers, so once you've settled on flavours you like, restocking doesn't mean buying a whole new device each time.

Flavour range

SKE has put together a lineup of around ten flavours for the Crystal CL6000, mostly leaning into the fruity, iced and candy-adjacent profiles that this brand's fanbase tends to gravitate towards. A few worth calling out:

• Blue Razz Lemonade, tart blue raspberry against a sharper citrus lemonade backdrop; one of the more balanced all-day options rather than a straight sugar hit.
• Blueberry Raspberries, a straightforward double-berry mix, rounder and less sharp than the razz lemonade, good if you want something fruity without much citrus edge.
• Blueberry Sour Raspberry, the same berry pairing but pushed towards a sourer, more puckering raspberry note on the exhale.
• Cherry Ice, ripe cherry with a cool menthol finish; the pick if you want something that isn't purely sweet fruit.

The rest of the range fills out similar territory, mixed berries, tropical fruit and iced variations, so whether you lean sweet, sour or cold, there's usually a pod in the lineup that fits. Because pods are sold separately, you're not locked into whatever flavour the kit ships with; it's easy to build up a small rotation and switch between them.

Setting it up and getting the best out of it

A refillable pod kit only tastes as good as how it's set up, and most disappointing first impressions come down to skipping a couple of basic steps rather than anything wrong with the device or the pod. Here's how to do it properly:

• Let a new pod sit before firing it. Once a pod is fitted, give it a few minutes before taking your first puff. This lets the e-liquid fully soak into the wicking material. Vape it dry and you'll get a harsh, burnt taste almost immediately, and that flavour can linger even after the wick has caught up.
• Prime with a couple of gentle draws first. Before you take a normal pull, a couple of soft, short puffs help settle the liquid around the coil evenly rather than in one spot.
• Take slower, steadier draws rather than rapid-fire hits. Chain vaping doesn't give the wick time to reabsorb liquid between puffs, which is one of the most common causes of a muted or scorched taste on any pod system, not just this one.
• Make sure the pod is seated properly. A pod that isn't clicked fully into the device can cause air leaks or an inconsistent draw, which reads as weak flavour even when the pod itself is fine.
• Store spare pods flat and away from heat. Extreme temperatures can affect how the e-liquid behaves inside the pod before you've even opened it.

Follow that sequence and the CL6000 should deliver consistent flavour and vapour from the first real puff through to the last, rather than a strong start that tails off halfway through the pod's life.

Who the SKE Crystal CL6000 suits

This kit sits in a specific spot: it's aimed at people who like the convenience and simplicity of a disposable, no buttons, no settings, no fiddly rebuilding, but who'd rather not bin an entire device every time the pod runs dry. If you're currently getting through disposables regularly, switching the pod on a device like this instead cuts down on both waste and the number of full units you're buying.

Compared with a true disposable vape, the appeal is straightforward: the body sticks around, only the pod gets replaced, and pods generally work out cheaper per puff than a brand-new disposable each time. Compared with more advanced refillable pod systems that use bottled e-liquid and adjustable settings, the CL6000 keeps things simpler, pods click in, there's nothing to tune, and there's no bottle to pour. That makes it a solid fit for anyone who wants disposable-style ease without the disposable-style waste, and less suited to vapers who specifically want to fine-tune airflow, wattage or use their own choice of bottled e-liquid on a whim.

It also works well as a step for smokers moving across to vaping for the first time, the lack of any setup complexity means there's very little to get wrong.

Nicotine strength guidance

UK regulations cap nicotine salt e-liquids at 20mg/ml (2%), and any pods or refill containers sold for the CL6000 will fall within that limit as standard for the UK market. Nic salts are formulated to feel smoother at higher strengths than traditional freebase e-liquid, which is why pod kits like this one are usually paired with salt-based liquid rather than the shortfill-style juices used in bigger tank setups.

As a general guide:

• Heavier smokers (around 20+ cigarettes a day) typically find the higher end of the strength range, closer to the 20mg/ml cap, most satisfying.
• Light to moderate smokers often get on well with a mid-range strength.
• Ex-vapers stepping down, or anyone who just wants the hand-to-mouth habit and flavour without the nicotine, should look for a 0mg option, these contain no nicotine at all.

If you're unsure, it's generally easier to start slightly higher and step down over time than to start too low and end up unsatisfied and reaching for extra puffs to compensate. All nicotine-containing products from SKE are strictly for adults aged 18 and over.

Care and storage

A little basic care keeps the device and pods performing properly for the long haul:

• Keep the device somewhere dry, out of direct sunlight, and away from extreme heat or cold, both the battery and the e-liquid inside a fitted pod are sensitive to temperature swings.
• Wipe the contact points between the device and the pod occasionally with a dry cloth if you notice any residue building up; a poor connection here is a common cause of a pod not firing properly.
• Store unused prefilled pods and refill containers upright where possible, and try to use them within a reasonable time of purchase rather than stockpiling for months.
• Keep the kit, spare pods and any e-liquid well out of reach of children and pets at all times.
• If the device won't be used for a while, it's worth removing the pod so the wick and liquid aren't sitting in contact with an idle coil for an extended period.

FAQ

How many puffs does the SKE Crystal CL6000 actually give?

SKE rates each pod at up to approximately 6,000 puffs, though real-world numbers vary depending on how long and how often you draw, shorter, gentler puffs will generally get you closer to the rated figure than long, hard pulls.

Do I need to buy anything else to keep using the kit?

Once your first pod is used up, you'll need a replacement, either a new prefilled SKE Crystal CL6000 pod in your chosen flavour, or a refill container if you'd rather fill your own. The device itself is designed to be reused across multiple pods.

Why does my new pod taste burnt or weak?

This is almost always down to not giving the pod a few minutes to soak before use, or vaping it too aggressively straight out of the packaging. Let it sit, prime it with a couple of gentle draws, and take slower pulls rather than rapid ones.

What nicotine strengths are available?

Strengths run up to the UK legal maximum of 20mg/ml (2%) nicotine salt, with a 0mg, nicotine-free option also available for those who want the flavour and habit without any nicotine at all.

Is this kit suitable for someone new to vaping?

Yes, there are no settings to adjust and no coils to build, which makes it one of the more approachable options for anyone switching from smoking or moving on from disposables for the first time.