Voopoo PnP-X Replacement Coils - Pack of 5

Voopoo PnP-X Replacement Coils - Pack of 5

The Voopoo PnP-X Replacement Coils are the swap-in atomiser heads built for devices using Voopoo's PnP-X coil platform, the newer generation of Voopoo's popular PnP series. This pack contains 5 coils, giving you a proper stock so you're never caught out mid-week with a dead coil and no backup. If your pod kit or mod is showing the tell-tale signs of a coil on its way out - and it will, sooner or later - this is the pack to have sitting in a drawer ready to go.

What This Coil Is Designed For

PnP-X coils are built to slot into pod kits and pod-mod devices that use the PnP-X coil system. Voopoo has used the PnP-X platform across a number of its newer pod devices, so if your kit's box or manual specifies "PnP-X" coils (rather than the original PnP or PnP2 fit), this is the correct replacement range. Coil platforms across brands are rarely interchangeable, so it's always worth checking the coil slot marking on your pod, or the packaging your device came in, before you buy. If you're not sure which coil your device takes, the safest move is to check the model name against the coil type printed on your existing pod or in the original box - PnP-X coils are not a drop-in fit for older PnP or unrelated third-party pod systems.

Coil Resistance Options

The PnP-X range is built around a spread of resistances, so you can match the coil to the kind of vape you actually want rather than being stuck with one setting. Broadly:

• Lower-resistance, sub-ohm coils - built for a more open, airy draw with denser vapour production and a warmer vape. These typically pair best with higher-VG e-liquids.
• Higher-resistance coils - designed for a tighter, more restricted draw closer to a mouth-to-lung style, generally better suited to nic salt e-liquids and a cooler, more discreet vape.

Always fit the resistance your device's wattage range is designed around - check the coil's printed resistance against the recommended wattage window on the coil itself or your device's manual, and start at the lower end of that range before working up. Running a coil well outside its intended wattage window is one of the fastest ways to burn it out early or get a harsh, unpleasant hit.

When to Replace Your Coil

Coils are consumable - there's no way around it, they wear out with use. How long one lasts depends heavily on how often you vape, what e-liquid you're running, and the wattage you're pushing through it, but there are some clear signs it's time to swap in a fresh one:

• A burnt or "toasted" taste that wasn't there before, even after a fresh fill
• Flavour that's gone flat, muted, or noticeably weaker than when the coil was new
• Gurgling, crackling, or spitting sounds during a draw
• Leaking or e-liquid pooling around the base of the pod or coil
• A darker-than-usual, discoloured coil visible through the pod window, where fitted
• Reduced vapour output despite the pod being properly filled

As a rough guide, most vapers get somewhere between a few days and a couple of weeks out of a coil before flavour starts to noticeably drop off, though heavy use, sweeter or sugary e-liquids, and high-VG juice can all shorten that. Sweetened e-liquids in particular tend to gunk up a coil faster than unsweetened ones, so if that's your usual choice, don't be surprised if you're changing coils more often.

How to Fit and Prime a PnP-X Coil

Getting a new coil off to a good start matters more than most people realise - a rushed first fill is the number one cause of a coil tasting burnt straight out of the packet. Here's the process:

• Remove the old coil from the pod, taking care not to spill any remaining e-liquid.
• Unbox the new coil and check the silicone seals are seated properly and undamaged before fitting.
• Push the new coil firmly into the pod until it clicks or seats flush - it should feel secure, not loose.
• Prime the coil before vaping: drip a few drops of e-liquid directly into the coil's wicking ports (the visible holes in the cotton) and let it sit for several minutes so the cotton fully saturates.
• Fill the pod with your e-liquid as normal and give it another few minutes before your first draw, so the freshly added liquid has time to soak into the cotton properly.
• Take a few gentle, slow draws without firing the device (if your kit allows this) to help draw liquid further into the coil before vaping normally.

Skipping the priming step - or filling and vaping straight away - is the most common reason a brand new coil tastes burnt on the first few puffs. A little patience here saves you a coil.

Getting the Best Flavour and Longest Coil Life

A few habits make a real difference to how long a coil stays tasting good:

• Don't let your pod run dry. Vaping on an empty or near-empty pod is one of the fastest ways to burn a coil, sometimes permanently, in just a few draws.
• Top up before it's empty rather than waiting until the last drop, giving the cotton time to stay saturated.
• Let a fresh fill settle for a few minutes before vaping, especially after the pod has been low.
• Stick to the coil's intended wattage range rather than pushing higher for bigger clouds - it shortens coil life fast and can affect flavour.
• Take slower, gentler draws rather than rapid back-to-back puffs, which don't give the wick time to re-saturate between hits.
• Store spare coils somewhere dry, away from direct heat, and use them within a reasonable time of opening rather than leaving them loose for months.

Frequently Asked Questions

Will PnP-X coils fit my older PnP or PnP2 device?

Not necessarily. PnP-X is a distinct coil platform from the original PnP and PnP2 ranges, and the fits are not guaranteed to be interchangeable. Check the coil type marked on your device or original packaging before buying to make sure you're getting the right one.

How many coils are in this pack?

This listing is for a pack of 5 PnP-X replacement coils, so you've got a solid supply on hand rather than buying one at a time.

How do I know which resistance to pick?

It comes down to the kind of vape you want. Lower-resistance coils give a more open, airy draw with heavier vapour, generally suited to higher-VG e-liquids. Higher-resistance coils give a tighter, cooler draw closer to a mouth-to-lung style, and tend to work well with nic salts. Match the coil to your device's supported wattage range either way.

My new coil tastes burnt straight away - what went wrong?

Almost always this comes down to priming. If the coil wasn't given time to fully saturate with e-liquid before vaping, the dry cotton scorches on first use. Remove it, if possible let it re-soak with a few extra drops in the wicking ports, and give it longer to settle before trying again.

Can I use any e-liquid with these coils?

Yes, but the coil resistance affects which style suits it best - sub-ohm resistances generally pair with higher-VG shortfills, while higher-resistance coils tend to suit nic salts. Any nicotine-containing e-liquid sold in the UK is capped at 20mg/ml (2%) under UK regulations, and is intended for adult use only.

Is this product suitable for anyone under 18?

No. This is a vaping accessory intended for use with nicotine-containing or nicotine-free e-liquids by adults only. Sale is restricted to customers aged 18 and over, in line with UK law.

UK Compliance

As with all vaping hardware sold on PinkVape, this product is intended for adult vapers in the UK and is offered in line with TPD (Tobacco Products Directive) requirements as they apply to vaping hardware. These coils themselves contain no nicotine or e-liquid - nicotine strength considerations only apply to whichever e-liquid you choose to run through them, and any nicotine salt e-liquid sold in the UK is capped at 20mg/ml (2%). If you're using a 0mg e-liquid, note that it contains no nicotine at all. Always buy replacement coils rated for your specific device platform, and dispose of used coils responsibly rather than with general household waste where local guidance advises otherwise.