Vape Troubleshooting: Leaking, Spitting, Not Charging & More (UK)
Vapes are simple, but a few issues come up: leaking, spitting, a light that won’t stop blinking, or no vapour at all. The good news is most are quick fixes you can do yourself. Here’s how to diagnose and solve the common ones.
Why is my vape leaking?
Leaking is usually down to overfilling, e-liquid getting into the central airflow tube, or a worn pod seal. Fill only to the max line, keep the device upright, avoid big temperature swings, and replace a pod that’s past its best. A quick wipe of the contacts helps too.
In short: don’t overfill, store it upright, and swap a tired pod, that fixes most leaks.
Why is my vape spitting or crackling?
A light crackle is normal, that’s the coil vaporising liquid. Spitting (tiny hot droplets) happens when liquid pools in the coil, often from too much liquid or short sharp puffs. Take slightly longer, gentler draws, and give a flooded pod a moment to settle. A quick tap of the mouthpiece onto a tissue clears excess liquid.
Why won’t my vape charge?
- Try a different USB-C cable and charger, the cable is the usual culprit.
- Clean the charging port gently (lint and liquid collect there).
- Check the charging light actually comes on when plugged in.
- If nothing works and the device is old, the battery may have reached end of life.
Why isn’t my vape producing vapour?
Check the basics: is it charged? Is the pod clicked in fully and not empty? Is a new pod primed (left to soak a minute)? Are the contacts clean and dry? Draw-activated devices need a firm, steady pull. If a pod is spent or the coil is burnt, swap it.
Why does my vape keep blinking?
A blinking light is your vape talking to you. Usually it means low battery (time to charge). Rapid or repeated blinking can signal a connection issue (reseat the pod, clean the contacts), a short, or that you’ve held the puff too long. Check your device’s light guide, but a charge and a pod reseat solve most cases.
How do I clean my vape?
Power off, remove the pod, and wipe the device and pod housing with a dry or barely-damp cloth. Clean the metal contacts with a dry cotton bud, and keep the charging port free of lint. Never submerge a vape in water. A quick clean every week or two keeps flavour crisp and connections reliable.
When should I replace my coil or pod?
Replace it when you notice muted flavour, a burnt taste, less vapour, or gurgling. For most pod kits that’s every 1–2 weeks with regular use. Priming a new pod (letting it soak before the first puff) and not vaping it bone-dry makes coils last longer, see why your vape tastes burnt.
Frequently Asked Questions
How do I stop my vape leaking?
Fill only to the max line, keep the device upright, avoid big temperature changes, wipe the contacts, and replace a worn pod. Overfilling and liquid in the airway are the usual causes.
Why won’t my vape charge?
Try a different USB-C cable and charger first, the cable is the common cause. Clean the charging port, check the light comes on, and if the device is old the battery may be spent.
Why is my vape not producing vapour?
Check it’s charged, the pod is clicked in and not empty, a new pod is primed, and the contacts are clean. Draw firmly and steadily; replace a burnt or spent pod.
Why does my vape keep blinking?
Most often it means low battery, charge it. Repeated blinking can indicate a poor pod connection (reseat and clean the contacts) or that a puff was held too long.
How often should I replace my vape coil or pod?
Replace it when flavour fades, tastes burnt, or vapour drops, typically every 1–2 weeks with regular use. Priming new pods and not vaping them dry extends coil life.
Recommended products
